Bypass BotDeflector, challenge flow résolu.
Un bypass BotDeflector sans navigateur. Takion résout tout le challenge flow, proof-of-work invisible plus captcha à icônes, et renvoie le token ChallengeFlowResult attendu par le site, sur les déploiements standalone comme sur les softblocks Queue-it.
Dernière mise à jour · Couverture testée contre une cible BotDeflector réelle.
Bloqué par BotDeflector ?
BotDeflector place un site derrière un challengeFlow ordonné : des étapes de proof-of-work invisibles plus un captcha à icônes, qui doivent toutes être passées dans l'ordre du serveur avant qu'il émette un token. Takion exécute tout ce flux côté serveur, sans navigateur et sans API de captcha payante, et renvoie le ChallengeFlowResult. Sur un site standalone vous l'ajoutez en tt_solutions, sur un softblock Queue-it vous l'échangez, et vous passez.
Comment fonctionne BotDeflector
BotDeflector (botdeflector.eu) est un mur de défis côté client. Au lieu de vous noter passivement, il donne au navigateur un challengeFlow ordonné et refuse d'émettre un token tant que chaque étape n'est pas passée. Il existe deux types d'étapes : inv, un proof-of-work invisible, et icon, un captcha image où trois icônes cibles d'une légende doivent être trouvées dans une scène et cliquées dans l'ordre de la légende.
Le proof-of-work est une recherche Cuckoo Cycle sur un graphe généré à partir de votre sessionId, et le serveur vérifie le cycle exact qu'un navigateur aurait trouvé en premier, donc un solver correct mais qui ordonne autrement échoue quand même. L'étape icon cache sa réponse chiffrée en AES dans le token du défi et impose côté serveur un temps de résolution minimum d'environ deux secondes, donc les réponses instantanées sont rejetées avec I024.
Vous le croisez à deux endroits, et c'est le même moteur dans les deux cas. Il est vendu en standalone, où le site parle à botdeflector.eu et où vous utilisez le résultat en tt_solutions. Et il fait tourner le défi que Queue-it sert sur ses pages de softblock : le token de flux est dans la page sous le nom botDeflectorJwtToken, les mêmes endpoints /pow et /icon sont servis depuis ipv4.challenge.queue-it.net, et le résultat est échangé via l'appel verify de Queue-it. Takion passe les deux via un seul endpoint, en changeant de mode.
Takion exécute tout le flux côté serveur et vous renvoie le ChallengeFlowResult. Pas de navigateur, pas d'API de captcha payante, pas de SDK de votre côté.
- Les défis que Takion couvre
- Étapes de proof-of-work invisibles (Cuckoo Cycle sur un graphe propre à chaque session)
- Captcha à icônes : trois icônes tournées et redimensionnées, parmi des leurres de la même bibliothèque
- challengeFlow en plusieurs étapes, passées dans l'ordre exigé par le serveur
- Softblocks Queue-it et déploiements standalone botdeflector.eu
- L'étape icon seule, via /solve/icon
Ce qu'un seul appel renvoie
Un seul appel résout tout le flux et renvoie le token ChallengeFlowResult, prêt à être utilisé sur un site standalone ou échangé sur Queue-it.
ChallengeFlowResultle token de flux signé : ajoutez-le en tt_solutions sur un site standalone, ou échangez-le sur Queue-it
solve_time_msla durée du flux complet, pour calibrer vos propres timeouts
challengesles types d'étapes résolus, dans l'ordre : invisible, icon, invisible (invisible, icon sur Queue-it)
# Standalone site (mode is optional, classic is the default)
curl -X POST https://botdeflector.takionapi.tech/solve \
-H "x-api-key: $TAKION_KEY" \
-H "Content-Type: application/json" \
-d '{ "mode": "classic", "site_key": "<SiteKey>", "account_id": "<AccountId>", "proxy": "host:port:user:pass" }'
# → { "token": "<ChallengeFlowResult>", "solve_time_ms": 7223,
# "challenges": ["invisible", "icon", "invisible"] }
# Queue-it softblock: pass the botDeflectorJwtToken from the page
curl -X POST https://botdeflector.takionapi.tech/solve \
-H "x-api-key: $TAKION_KEY" \
-H "Content-Type: application/json" \
-d '{ "mode": "queue-it", "flow_token": "<botDeflectorJwtToken>", "proxy": "host:port:user:pass" }'
# → { "token": "<ChallengeFlowResult>", "solve_time_ms": 3041, "challenges": ["invisible", "icon"] }Lire la documentation BotDeflectorUne seule clé, tous les murs. Un même format JSON, tous les vendors.
It also powers the Queue-it challenge
The challenge Queue-it serves on its softblock pages is BotDeflector: same engine, same /pow and /icon endpoints, served from ipv4.challenge.queue-it.net. Per our teardown, the company owner is Martin Pronk, a co-founder of Queue-it, which explains why. If you are looking for a Queue-it challenge solver, this is the page: one endpoint clears both, you just switch mode.
How the BotDeflector bypass works, end to end
The site hands your browser a flow. Takion runs it and hands you back the token that ends it.
- 1
The wall issues a challengeFlow
On a standalone site a
/flow-token/call returns a JWT carrying yoursessionIdand the ordered flow, typicallyinv,icon,inv. On a Queue-it softblock the same JWT is already in the page asbotDeflectorJwtToken, and it lives 120 seconds. - 2
You call /solve once
Send the
site_key,account_idand your proxy (standalone), ormode: "queue-it"with theflow_token(Queue-it). Nothing runs on your side, no browser and no SDK. - 3
We clear every step in order
The proof-of-work steps run a faithful Cuckoo Cycle search, so the edge order matches what the server expects. The icon steps go through our own detector and matcher and respect the server's minimum solve time, so they are not rejected with
I024. - 4
You spend or redeem the ChallengeFlowResult
Standalone: append
?tt_solutions=<token>on the protected navigation. Queue-it: POST it to the queue's.../challenge/botdeflector/verifycall and continue once it answersisVerified: true.
The pieces of a BotDeflector solve, decoded
This wall threads everything through headers and query parameters. Here is what each one is:
tt_solutions- the query parameter carrying the final
ChallengeFlowResulton a standalone site's protected navigation. ChallengeFlowResult- a short-lived signed token proving the whole flow was solved. It lives about a minute. The classic token records the requesting IP; the Queue-it one records the solved step types instead.
challengeFlow- the ordered step list, e.g.
[{inv,1},{icon,1},{inv,3}]. The server tracks completion per step, so steps cannot be skipped or reordered. botDeflectorJwtToken- the flow token embedded in a Queue-it softblock page. It lives 120 seconds there, against 600 on botdeflector.eu.
x-tt-flow-token- request header carrying the flow token on
/pow/getand/icon/get. Its siblingx-tt-ch-flow-tokendoes the same on/verify-flow, next tox-tt-solution-tokens(the comma-joined step tokens) andx-tt-client-fingerprint. Proof-of-work- a Cuckoo Cycle seeded from your
sessionId. On botdeflector.eu it runsNODES_BITS18,EDGES_BITS20 and cycle length 7; the Queue-it softblock uses a lighter 14, 16 and cycle length 8. Either way the server checks the exact cycle a browser would find first. Queue-it hostsipv4.challenge.queue-it.netserves the /pow, /icon and /verify-flow API,dual.challenge.queue-it.netthe icon assets, and the softblock itself lives at{customer}.queue-it.net/softblock/.
Why a vision model will not solve this for you
The obvious move on an image captcha in 2026 is to point a frontier vision model at it. We benchmarked 14 of them before building anything, and it does not hold up: the best, Claude Sonnet 5, cleared BotDeflector's icon step about 60 percent of the time. That is not a solver, that is a coin flip with an invoice attached.
You pay for the misses too. At $0.0044 a call and roughly 1.7 calls for every captcha that actually clears, a vision model costs about $0.0073 per solved captcha, and every call ships an image to a frontier model and waits for the answer.
The icons are not hard to see. They are solid and bright, around 35 pixels across. What makes it hard is that each one is rotated to any angle and rescaled, and the decoys around it come from the same icon library as the targets, so it is a fine-grained matching problem dressed up as object detection. General models are not trained for it.
Takion runs a purpose-trained detector and matcher instead: 99.0 percent on the first try at production settings, and 100 percent within five submits. The vendor also swaps its icon artwork without notice, and we retrain within hours when it does. No human solver, no third-party captcha service, no per-solve model bill.
Why this wall is different from a token vendor
Most antibot walls score you and mint a cookie. DataDome reads a fingerprint and hands back datadome, Akamai wants sensor_data and returns _abck. The work is in producing a convincing payload, and once you can, a solve is fast.
BotDeflector makes you pass real steps in a fixed order, and it puts a clock on one of them. The proof-of-work is cheap when it is done right, 50 to 60 milliseconds, but the icon step has a server-enforced floor of about two seconds, and every step is its own round trip. So a solve takes seconds rather than milliseconds. Budget for that in your pipeline.
The upside is that it is simple to spend. No cookies to carry on botdeflector.eu, no long-lived session state to keep warm. You solve, you get a token, you spend it within the minute, and you move on.
Where this wall is soft
Three implementation gaps, found by taking the challenge apart. They are why a solve is reliable rather than best-effort:
No origin check- the challenge does not verify which domain is serving it, so a
SiteKeyworks from anywhere. Our teardown ran the widget on an unrelated domain. Every serious captcha (reCAPTCHA, hCaptcha, Turnstile) binds a site key to a domain allowlist. No rate limit on botdeflector.eu- we pulled around 1,200 challenges from one IP in an hour without being throttled. Queue-it is stricter: it rate-limits IPs on
dual.challenge.queue-it.net, so use proxies there. No attempt limit- a wrong answer on
/icon/verify(I024 or I026) does not burn the challenge token, so the same challenge can be retried until it clears.
What breaks a BotDeflector solve
These are the ways a solve stops working:
- Sitting on the token. The ChallengeFlowResult lives about a minute. Solve, then spend it. Do not queue it for later.
- Reading the Queue-it flow token too early.
botDeflectorJwtTokenlives 120 seconds, so call /solve right after you read it from the page. - Solving on a different IP than you browse from. The classic token records the requesting IP. Solve through the same proxy you will use for the protected navigation.
- Reordering the flow. The server tracks which steps are complete per
sessionId, so they have to be cleared in the order it issued them. - Answering the icon step too fast. Wait at least 2.3 seconds after
/icon/get, or you getI024even when the coordinates are right. - Reimplementing the proof-of-work loosely. A valid cycle in a different edge order still fails. It checks for the cycle a browser would have found first, not any cycle.
The one rule that keeps you cleared
Solve through the proxy you are going to browse with, and spend the token within the minute. On Queue-it, solve within 120 seconds of reading the flow token, then redeem.
Quelques sites utilisant BotDeflector
BotDeflector protège ces sites. Takion le franchit sur chacun, donc un bypass de foot locker est le même POST unique que n'importe quel autre mur.
BotDeflector sur le softblock Queue-it
FAQ bypass BotDeflector
- Le ChallengeFlowResult, un token signé à courte durée de vie qui prouve que tout le flux a été résolu. Sur un site standalone, vous l'ajoutez en
?tt_solutions=<token>sur la navigation protégée. Sur Queue-it, vous l'échangez à la place (voir plus bas). Il vit environ une minute, donc utilisez-le tout de suite. - Oui, c'est le même moteur. Sur un softblock Queue-it, lisez le token de flux dans la page (
botDeflectorJwtToken: '<jwt>', il vit 120 secondes), appelez /solve avecmode: "queue-it", puis échangez le résultat : envoyez-le en POST àhttps://{customer}.queue-it.net/spa-api/queue/{customer}/{event}/challenge/botdeflector/verifyà la fois commesolutionet commesessionId(comme le fait le vrai widget ; le token de flux danssessionIdest aussi accepté), et Queue-it répondisVerified: true. - Quelques secondes. Lors de nos derniers runs en production, un flux classique complet a pris de 5.6 à 7.2 secondes et un flux Queue-it environ 3 secondes. Presque rien de tout ça n'est du calcul : le proof-of-work prend 50 à 60 millisecondes. Le temps vient du plancher d'environ deux secondes imposé par le serveur sur l'étape icon, plus les allers-retours HTTP entre les étapes.
- Pas de façon fiable. Nous avons benchmarké 14 modèles, et le meilleur, Claude Sonnet 5, a passé l'étape icon environ 60 pour cent du temps. À $0.0044 l'appel et environ 1.7 appel par captcha réellement passé, ça revient à environ $0.0073 par captcha résolu, pour un taux de réussite plus faible et une réponse plus lente. La difficulté, c'est la rotation, l'échelle et les leurres tirés de la même bibliothèque d'icônes, un problème de matching fin pour lequel les modèles généralistes ne sont pas entraînés. Le détecteur et le matcher entraînés spécifiquement par Takion passent 99.0 pour cent du premier coup avec les réglages de production, et 100 pour cent en cinq soumissions maximum.
Tous les autres murs
Commencez à contourner BotDeflector dès aujourd'hui.
Essai gratuit, sans carte. Une seule clé passe tous les murs, et votre première résolution arrive dans l'heure.